simple fence

Simple fence

simple fence, try this

It may be simple and not every one's "cup of tea" but it works

It is very simple to make and is only designed to indicate that you should not cross this area.

Quantity and lengths are dependant on your area to be "fenced off" First the pipe was cut into three equal lengths and each was hammered into the ground, to make it stable. then a 90 degree bend was put on the first pipe and the rope pushed down this similar with the T piece (except the rope goes directly through) and the same was done at the other 90 degree bend.

Materials used:

Rope, 40mm push fit pipe, joints as required ,screws as required

To make sure the joint is not pulled off a 1 1/2 screw was screwed through each joint. If you do this at each end too it will go through the rope securing it.
back see here